배우기로 돌아가기

Video4 min read

DLSS Frame Generation on Video

DLSS Frame Generation synthesizes intermediate video frames using optical flow and NVIDIA RTX acceleration, converting 24 FPS or 30 FPS clips into 60, 120, or higher FPS video.

Requirements

  • Software: Visual Enhancer on 64-bit Windows 10 or Windows 11.
  • GPU: NVIDIA RTX GPU (compute capability >= 7.5; RTX 40 or RTX 50 series recommended).
  • Windows setting: Enable Hardware-Accelerated GPU Scheduling (HAGS) in Windows Settings under System, Display, Graphics, Default graphics settings.
  • Resolution: Minimum 64 × 64 px up to 16,384 × 16,384 px maximum per side.

Step-by-step

  1. Switch to Video mode and load your clip

    Open Visual Enhancer, switch the Pipeline inspector to Video mode, and drag and drop one or more video files into the viewport or Batch Queue.

  2. Enable DLSS Frame Generation

    Scroll down the Video Pipeline rail and toggle DLSS Frame Generation on. Only one frame generator (DLSS Frame Generation, FSR Frame Generation, or Video Frame Generation) can be active per workflow.

  3. Choose Target FPS or Multiplier

    Select how the output frame rate should be calculated:

    • Target FPS (23.976 up to 480, such as 60 or 120): Useful when targeting a fixed display refresh rate or normalizing mixed-FPS clips. Target FPS must exceed the incoming frame rate.
    • Multiplier (2x–8x): Produces an exact integer cadence multiple (24 → 48 FPS at 2x, or 24 → 96 FPS at 4x) with zero fractional timing adjustment.
  4. Set Optical Flow Quality to High

    Keep Optical Flow Quality on High for final renders. High solves motion vectors on the finest grid so thin geometry, lateral camera pans, text, and semi-transparent smoke stay cohesive without tearing or halos. Use Medium or Low only for faster draft previews.

  5. Preview on the timeline

    Pick a Preview Length (1 s–30 s) and click Preview. Covered frames are highlighted in green on the transport bar for Hold-to-Peek or 2-Up playback comparison against the original frame rate.

  6. Render and export

    Click Render Video(s), choose your output path, container, and codec (including 10-bit HDR codecs such as H.265 NVENC or AV1 NVENC if your source is HDR or RTX Video HDR is enabled), and start encoding.

Settings & ordering

  • Upscale vs. Frame Generation order: Upscaling before DLSS Frame Generation feeds sharper edges to optical flow at higher VRAM cost. Running frame generation at 1080p before lightweight scaling lowers GPU load on 4K exports.
  • HDR support: DLSS Frame Generation supports HDR video when Preserve / Export 10-bit HDR is enabled with a 10-bit codec (H.265 NVENC, AV1, VP9, ProRes, or FFV1).
  • Non-NVIDIA GPUs: On AMD or Intel DirectX 12 GPUs, use FSR Frame Generation in the same Video Pipeline rail instead.
ControlOptionsDefaultRecommendation
Frame-rate modeTarget FPS / MultiplierTarget FPSTarget FPS for 60/120 Hz screens; Multiplier for exact 2x–8x
Target FPS23.976–48060Use 60 or 120 FPS (must exceed source FPS)
Multiplier2x–8x2x2x for 30 → 60 FPS; 4x or 5x for 24 → 96 or 120 FPS
Optical Flow QualityHigh, Medium, LowHighUse High for clean edges and fast pans

Generate higher frame rates in Visual Enhancer

Available for Windows 10 & 11 to run DLSS Frame Generation locally on your RTX GPU.

Explore Visual Enhancer

더 많은 가이드