How to Apply DLSS 5 on Image and Video
DLSS 5 Neural Rendering enhances micro-contrast, local tonal depth, edge crispness, and surface structure at native resolution using NVIDIA NGX. This guide covers applying it to still images and video clips in Visual Enhancer.
Requirements
- Software: Visual Enhancer on 64-bit Windows 10 or Windows 11.
- GPU: NVIDIA RTX GPU (
compute capability >= 7.5, Turing RTX 20 series or newer) with an up-to-date NVIDIA Display Driver. - Resolution: Minimum
64 × 64 pxup to16,384 × 16,384 pxmaximum per side.
Step-by-step
Choose Image or Video mode
Open Visual Enhancer in the Neural Rendering workspace and select Image or Video mode in the Pipeline inspector on the right. Image and Video modes keep separate queues and stage settings.
Load your photo or video
Drag and drop files or folders into the viewport or Batch Queue. For images, you can also press
Ctrl+Vto paste copied files, screenshots, or image URLs.Enable DLSS Neural Rendering
In the Pipeline rail on the right, toggle the DLSS Neural Rendering switch on and expand the card to reveal its controls. Stages execute from top to bottom. If your source has compression noise, place Denoising above DLSS Neural Rendering.
Tune the core parameters
Adjust the model flavor, strength, and local detail controls to match your footage:
- NR Style: Pick
Style 0(balanced default),Style 1, orStyle 2. - NR Intensity (
0.00–2.00):0.01–1.00blends within the calibrated native range.1.01–2.00applies residual boost for stronger edge punch and surface relief. - NR Passes (
1–4): Runs sequential refinement passes. Use1–2passes for natural photos or videos, and keep NR Intensity moderate (0.55–0.85) when using2or more passes. - Local Tone and Local Structure (
0.00–1.00): Control highlight and shadow contrast sculpting separately from fine surface texture.
- NR Style: Pick
Protect skin or target regions with a mask (optional)
Turn Automatic Mask on and lower Skin Structure Strength (
0.15–0.40) to keep portraits natural, or click Load Control Mask… to supply a custom RGB mask where Red controls NR Intensity, Green controls Local Tone, and Blue controls Local Structure.Set Optical Flow Quality (Video only)
For video clips, set Optical Flow Quality to
High(default) for stable motion across camera pans, foliage, and fine fabric. UseMediumorLowfor faster test previews.Preview and render
Click Preview to inspect the result using Split, 2-Up, or Hold-to-Peek comparison. When ready, click Render Image(s) or Render Video(s) to choose your output folder, container, and codec.
Recommended settings
| Use Case | NR Style | NR Intensity | Passes | Local Tone / Structure | Notes |
|---|---|---|---|---|---|
| Subtle filmic polish | Style 0 | 0.45–0.65 | 1 | 0.70 / 0.55 | Automatic Mask On, Skin 0.25 |
| Crisp landscape or architecture | Style 0 or 1 | 0.90–1.15 | 1–2 | 0.85 / 0.90 | Automatic Mask Off |
| Clean video restoration | Style 0 | 0.60–0.85 | 1 | 0.80 / 0.75 | Optical Flow Quality: High |
| Noisy or low-light footage | Style 0 | 1.15–1.35 | 2 | 0.85 / 0.90 | Enable Denoising before NR |
Run DLSS 5 locally with Visual Enhancer
Available for Windows 10 & 11 to run DLSS Neural Rendering directly on your NVIDIA RTX GPU.
More guides
Generate 60 FPS, 120 FPS, or higher video frame rates with DLSS Frame Generation and clean motion vectors.
Colorize and grade images and videos using 12-slider adjustments, Reference Image matching, .cube 3D LUTs, and Auto Fixed Frames.
Sharpen images without halos using AMD CAS and NVIDIA NIS, choose appropriate sharpness levels, and order sharpening in your pipeline.